105 replies to this topic

[brr]

CraigT, on Sep 05 2010 - 05:57 AM, said:

I finally got it to work...thanks guys
Now...
Is there a list that shows which keys control the different Pribluda functions? (Instead of 0 X 75, 0 X 7b, etc shown in the ini)
Also, the indicator is "in" the MPH readout. How do I move those?
Thanks in advance

See the instructions at Amir Kamal's Pribluda website https://www.amirkamal...uda_readme.html

[CraigT]

Thanks brr
All I need now is to find out how to separate the gear indicator and the MPH readouts and I will be good.
Is it a rasty issue? I am using the 16_9 rasty on a 22" monitor

[CraigT]

I changed the font to Courier New and all is fine now!!!

[miner2049er]

Just a note to say that I had no Prib output at all with D3DV2 and Prib 1.1.2.0.

I had no output even in OpenGL with 1.1.2.1 but the dll only zip file has fixed everything.

Thanks all.

[SteveC43]

Wow. How did I miss this?

I also am one that doesn't want to fix stuff that's not broken. So, the other day I started having problems where the old rasterizer would not show the full screen and the direct mirror bit din't fix it. I tried the D3D V2 and it worked fine, but with no prib. I started searching and found this thread. I also had the write error and the latest prib fixed it. Nicely done brr, as always. Thanks!  

[Iron99]

Thanks to all who had a hand in this .

Works perfectly on my machine in both OGLv2 and DXv2 at 60FPS. Good stuff!

[DHosein]

I'd somehow missed this release also.. yet it's been something I've been waiting for for a long time. Always preferred D3D over OGL.. the picture seems just that little bit sharper to me.

Thanks all who have been involved in this one. Works perfectly.

[bbp]

Hi folks, Steve here, new member, new GPLer, new PC user too (sorry, Mr Jobs has gotten my computing moneys thus far), so it's been quite the learning curve.
I've been lurking here a lot and getting plenty of tips and downloads, and amazingly I've gotten a pretty stable setup so far with 65, 66, 67, 69 and GT all working well. So firstly, thanks.
My GPL folder looks pretty messy, I'm certainly not used to setting up file directories and a multitude of other PC specific stuff, but it's working fine so far. Maybe when a readme says to put something in the GPL folder, I'm supposed to drop it somewhere more specific than just the first GPL folder? I just don't know yet, but hey it works so far.

I am having a problem now that I've set up Pribluda though. d3dv2 rasterizer and openGL both ok, prib is now showing in both, but with a red text in the top left of the game screen, under the upper prib bit, saying
"unable to load pribluda.ini or wrong version, falling back to defaults"
I've downloaded 1.1.2 first and 1.1.1 since from the preferred locations here and elsewhere, but can't seem to find any pribluda.ini file in either of the DLs.

Pribchanger is in GPL folder, the .xml is in GEM Options folder now, I moved what seemed to be the .ini s (five different resolution prib thingys? to GEM Options, managed to select the correct resolution version ok), the Enable prib box shows up down by the car sounds box in GEM's front page, but somehow it still won't give up the everpresent red text in game?

Do I need to download prib 0.97 to get the .ini in the first place? Or??

Hope that's enough info.

And many thanks for this great resource for what I'm finally discovering is as good a sim as expected. I've had the CD sitting here for a year after hankering for the game for years, and now I've finally got access to the PC hardware to have a go I'm stoked. Onwards and upwards.
I can't get the replay analyser to find lap replays yet either, so I haven't been able to check telemetry to help me see how to get within 10 sec of a fastest lap even on a short track yet, and I'm a minute back at Clermont Ferrand in the 65's, which I've just discovered today, and LOVE (that little dirt track you can use when you've rolled umpteen times over the side of the mountain is a cack); but baby steps. Prib sorted first, replays next. Then maybe I'll try some online beginners races soon?

Cheers, and thanks again,
bbp.

Edited by bbp, Apr 19 2011 - 05:00 AM.

[Bob Simpson]

Try this ini file.

Attached Files

•  PRIBLUDA.INI   2.21K   139 downloads

[bbp]

Bob Simpson, on Apr 27 2011 - 09:10 PM, said:

Try this ini file.

That's done it. And a nicer font size too. Thankyou sir.

[Stainaz]

Boy, this is getting confusing and complicated.
I'm actually just trying to get the varikkostoppi mod by brr to work with the 65 mod. The readme told me to get pribluda for which I found a homepage by some Amir Kamal. He mentioned on his homepage some '65 patch by Steffen Weitzdörfer so I googled it and landed back here, only to find out the version in this thread here seems to be a lot newer than the one on Amir's website.

So can I just grab the latest release (which seems to be 1.1.2.1?) and the .ini file which was mentioned two postings above? Or do I have to go through Amir's stuff and patch up everything step by step? Do the new versions automatically work with the 65 mod or do I have to hunt down this Steffen Weitzdörfer?

And is it possible to just add the FUEL indicator to the dashboard? I've already hex-edited the game to show me a digital dashboard and I'd like to just add the fuel information to that if possible.

Need to read more. Doesn't show in D3D and Open GL looks like :<img src='https://srmz.racesimcentral.net/publ...O_DIR#>/poo.gif' class='bbc_emoticon' alt='::' />: on my system.
OK. Read more. What is that D3Dv2 everyone is talking about?


OK. Googled rasterizers, got this which led me to this which seems to be the thing everyone's been talking about in here.

Aaaand: IT'S WORKING

It all looked so easy back on gpllinks.org :|

Edited by Stainaz, Jun 02 2011 - 01:26 PM.

[Stainaz]

How do you switch off ATI's anti-aliasing for GPL?
A friend of me can't get the pribluda stuff visible although it's perfectly installed (= works on my system, and I don't have an ATI graphics card).

The trouble he has now is that he can only switch the anti-aliasing to 2.x or higher. There's no option for turning the thing off.
Does anyone know?

[MXN]

Hi everyone!

I read the topic, tryied everything, installed last version 1.1.2.1 but still have prog not working.

The log:

Quote

Starting pribluda 1.1.2.1
build time: Jul  2 2010 11:16:22
found GPL (gplcgt.exe)
GPL is v1.2.0.2
GPL is US
playerini is: placGT.ini
found roglv2, attempting to hook...attempting to hook gpl(...success
attempting to hook gpl(enterto)...success
reading settings from ini...success
Setting opengl font size
wgl font size 12.000000
wgl font factor 2.000000
Using bitmap fonts

Using OpenGL V2, GEM+, mod GT '67.
Videocard NVIDIA GeForce 8600, nothing did with its default settings.

[brr]

MXN, on Aug 25 2011 - 02:33 AM, said:

Hi everyone!

I read the topic, tryied everything, installed last version 1.1.2.1 but still have prog not working.

Use the latest pribluda.dll, see first post in this topic (the line starting with UPDATE) and follow the second link.

[MXN]

brr, on Aug 25 2011 - 02:52 AM, said:

MXN, on Aug 25 2011 - 02:33 AM, said:

Hi everyone!

I read the topic, tryied everything, installed last version 1.1.2.1 but still have prog not working.

Use the latest pribluda.dll, see first post in this topic (the line starting with UPDATE) and follow the second link.

Thank you! Its working now.
So many options... last time i used it there were less... Great job!