8 replies to this topic

[David Wright Lo67]

Power & Glory Updater from 3.1 to 3.2

What you will need:

* Power&Glory v3.1 already installed

* 1 file: PnGv3.2_updater.exeHow to start installing:

Just run PnGv3.2_updater.exe

Download Power&Glory v3.2 Updater

1st mirror by DrivingItalia.net - NB this site needs registration but will give you access to many other mods and tracks

Power&Glory v3.2 updater download

2nd mirror by FileHosting.org - NB this site requires you to submit an e-mail address

PnGv3.2_Updater.exe

3rd mirror by MEGA - NB simultaneous connections and bandwidth are limited

PnGv3.2_Updater.exe

Power&Glory v3.2 Complete Installer

What you will need:

* A GTR2 installation. Either v1.0 or v1.1 (the P&G installer updates to 1.1). A clean install is ideal.
* 4 files:
PnGv3.2_installer.exe
PnGv3.2.001
PnGv3.2.002
PnGv3.2.003

- Please pay attention to the names of the files, numbered data file names are critical.**No extra "[1]" or anything added anywhere in the file names.
- All the files should reside in the same folder.
- You DON'T need to UNPACK any of these.
- When installed in a clean copy of GTR2 using option #2 - the installation size is approximately 4.2 GB

How to start installing:

Just run PnGv3.2_installer.exe

Notes on the installing process itself:

The install process is straight forward except after a install type selection:*"Please select the desired install type:"

We have 2 choices here to select from.

The differences between #1 and #2:

#1 uses an existing GTR2 installation to copy needed files from to a new PnG folder.**Copy process will do CRC checking for some of the critical files to ensure that the resulting PnG folder will contain only correct file versions.**The GTR2 installation will remain intact, no files will be changed there.
#2 will remove all unnecessary files from the given GTR2 path and add PnG files over them.**There will be no CRC checking for the remaining GTR2 files.**Naturally this GTR2 installation will not remain intact as it is converted to a full PnG installation.

Both #1 and #2 will copy/save your player profiles to the new PnG installation (if the source has profiles).

"Destination folder" (with both #1 and #2)
This is the path where your PnG will reside in the end.**Note that in #2 this folder should have your preinstalled GTR2 in it to be converted.

"Source folder for GTR2 files" (only with #1)
This should point to a folder where you have a clean GTR2 installation, either version 1.0 or 1.1.**The GTR2 files in there will not be modified.

In a popup window: "Would you like your player profiles copied from the GTR2 installation?" (only with #1)
If you answer "No" the installer will not even try to copy your player profiles to the PnG installation.**Then when you start PnG the first time you will need to create a new profile for it to use.

Download Power&Glory v3.2 Complete

Run the installer and follow the instructions carefully.
We*STRONGLY RECOMMEND*installing on a clean GTR2 install (any version as the mod includes all patches) using options 1 and 2 for online stability.

1st mirror by DrivingItalia.net - NB this site needs registration but will give you access to many other mods and tracks

Power&Glory v3.2 download

2nd mirror by MEGA - NB simultaneous connections and bandwith are limited

PnGv3.2_installer.exe
PnGv3.2.001
PnGv3.2.002
PnGv3.2.003

Trouble Shooting - If you experience problems with the complete installation you can check the integrity of the downloaded files using this file checker

PnGv32_InstalFile_checker.exe

[Stefan Roess]

Using the PnGv3.2_Updater I get this error during the installation.
I downloaded the file twice, once from MEGA and once from FileHosting.org.
Any ideas?

Attached Files

•  Dwm 2016-01-05 15-48-51-79.jpg   21.74K   40 downloads

[Stefan Roess]

Stefan Roess, on Jan 05 2016 - 08:52 AM, said:

Using the PnGv3.2_Updater I get this error during the installation.
I downloaded the file twice, once from MEGA and once from FileHosting.org.
Any ideas?

I gave it another try and downloaded the file again from MEGA
and now the installation went fine
Off racing now....

[David Wright Lo67]

Glad you got it sorted Stefan.  I'd not seen that error before so couldn't offer a solution.

[ljmagyar]

Just in case - there's a mirror from the old AutoSimSport article here:  https://autosimsport....wer_n_Glory.zip

[David Wright Lo67]

ljmagyar, on Feb 05 2016 - 08:44 AM, said:

Just in case - there's a mirror from the old AutoSimSport article here:  https://autosimsport....wer_n_Glory.zip

That is very much out of date I'm afraid.

[ljmagyar]

David Wright Lo67, on Feb 05 2016 - 11:59 AM, said:

ljmagyar, on Feb 05 2016 - 08:44 AM, said:

Just in case - there's a mirror from the old AutoSimSport article here:  https://autosimsport....wer_n_Glory.zip

That is very much out of date I'm afraid.

well, I could update it <G>

[veeman]

I am many years late, but I have been trying to down load Power and Glory 3.2 using a clean GT2R file and I keep getting a message,
"#Error:unpacking error , status 2." I am using Mega to down load. Any suggestions to correct the problem will be greatly appreciated.

[jgf]

Generically speaking, several things to try in such situations.

-Temporarily disable your anti-malware program and download again.

-If using a download manager, disable it and try the download again.

-Use a different browser to download again.